L2CKTS
T Pattern Stainless Steel Swing Check ValveFeatures:
- Full Bore
- Investment Casting
- 200 WOG
- Threads to: ANSI B1.20.1
- Maximum Temperature: 177° C (350° F)
LFPC810 Class 800
Forged Steel Bolted Cover Swing Check ValveFeatures:
- Design: API 602
- Testing: API 598
- Threaded ends to: ASME B1.20.1
- Socket weld ends to: ASME B16.11
- Carbon Steel Class 800 – 1975 psig @ 100° F
LFSC-811 Class 800
Forged Steel Bolted Cover Piston Check Valve
Features:
- Design: API 602
- Testing: API 598
- Threaded ends to: ASME B1.20.1
- Socket weld ends to: ASME B16.11
- Carbon Steel Class 800 – 1975 psig @ 100° F
LDC-750C
ANSI Class 150 - 2500 Cast Steel Wafer Check Valve
Features:
- Wafer style, dual door check valve.
- Economical, lightweight, compact design – significantly lighter and less expensive than comparable swing check valves.
- Easy to install and maintain.
- Smooth, spring assisted closing reduces water hammer.
- Long-legged springs allow plates to open/close without seat scrubbing.
- Rugged Inconel X-750 spring is standard in all steel & stainless steel valves.
- Innovative 316SS seat, standard in all WCB metal seated valves, combined with standard 316SS plates provides a true all stainless steel seating area.
- All WCB & 316SS valves conform to NACE MR-01-75.
- Manufactured to API 594 & tested to API 598.
L278-CS-300
ANSI Class 300 Cast Steel Swing Check Valve
Features:
- Flanged ends, bolted cover, WCB body & cover, 13Cr/HF trim.
- Flange dimensions: ANSI B16.5
- Face-to-Face dimensions: ANSI B16.10
- Testing: API 598
- Design: API 600
L278-CS-150
ANSI Class 150 Cast Steel Swing Check ValveFeatures:
- Flanged ends, bolted cover, WCB body & cover, 13Cr/HF trim.
- Flange dimensions: ANSI B16.5
- Face-to-Face dimensions: ANSI B16.10
- Testing: API 598
- Design: API 600
LDC-700E
ANSI Class 125 Cast Iron Wafer Check Valve
Features:
- ANSI Class 125 Cast Iron Wafer Check Valve
- Wafer style, dual door check valve
- General Design: ANSI Class 125 (EN 12334) & API 594
- Working Pressure: ASME B16.34 (EN 12334)
- Flange mate: ANSI B16.1 & B16.5
- Face to face: ISO 5752-82
- Valve Testing: API 598
L278-CI-125
ANSI Class 125 Cast Iron Swing Check Valve
Features:
- Flanged ends, bolted cover, Cast Iron body & cover, Bronze trim.
- Flange dimensions: ANSI B16.1
- Face-to-Face dimensions: ANSI B16.10
- Testing & Design: MSS-SP-71
L160T
200 WOG Brass Vertical Check Valve
Features:
- Threaded Ends, Spring Loaded, Rubber Seat
- Nominal Pressure: 1.6MPa
- Working Medium: Water, Non-corrosive Liquid
- Working Temperature: -20°C<T<0° C
L150T
Brass T Pattern Swing Check Valve
Features:
- 200 WOG, Threaded Ends, Brass Body
- Valves conform to: MSS SP-80, Type 2
- Threaded Ends per ANSI B1.20.1
|
|
