HOMESTEAD VALVE SERIES 120 ECCENTRIC PLUG VALVES

Phone: 847-356-0566 Fax: 847-356-0747 E-Mail: sales@mmcontrol.com

SERIES 120 ECCENTRIC PLUG VALVES

2" - 72"

100 years of quality is built into every Homestead® Eccentric Plug Valve

Exclusive TRUE Bi-directional design
CAD/CAM Design
High quality castings
Unequaled craftsmanship
Advanced manufacturing procedures

For over 100 years Homestead® has been building a reputation of dependability, reliability, safety and uncompromising quality. Continuing in this tradition, this new eccentric plug valve delivers the same high level of performance you have come to expect from Homestead.

PLUG

Single piece plug/stem is designed for a quick lift camming motion to provide both low torque and reduced wear of the plug face elastomer. The elastomer extends along the stem in both directions to protect the integral tunnions and form the bearing interference. A wide range of plug elastomers are available to assure complete fluid compatibility.

BONNET

The high stresses associated with compression gasketing have been eliminated by incorporating high quality o-rings into our bonnet design.

FLOW

Valve ports have been enlarged and tapered to reduce pressure drop and provide enhanced handling of municipal sludges.

POSITION INDICATORS

Travel stops are integral for full travel indication in both directions. Intermediate positions are indicated in 10 degree increments. Positive indication is given on lever and gear operated valves.

BODY

The Homestead eccentric body casting is in ASTM A126 Class B cast iron and conforms to the leading standard for wall thickness. Flange thickness, diameter and drilling fully conform to ANSI B16.1 Class 125. Alternative flanged, screwed or mechanical joint ends are available. A high quality two-part epoxy coating can be applied externally and internally to protect the casting integrity and assure long, trouble-free performance.

SEAT

Homestead's eccentric valve seat has been geometrically optimized for low torque operation and extended life. A 90% raised welded nickel seat is incorporated to resist the effects of corrosion and erosion.

STEM SEAL

Homestead's fully adjustable seals assure stem sealing in even the most demanding applications.

BEARINGS

316 stainless steel radial bearings are utilized to assure long trouble-free operation.

WARNING: Some of the products we sell can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Contact your sales rep or go to www.P65Warnings.ca.gov for more information.

All registered trademarks are fully acknowledged by: M&M Control Service, Inc.

M&M Control Service, Inc. does not represent or claim any affiliation, association, connection or approvals with or from any manufacturer unless stated. We fully acknowledge all trademarks and/or names which are pictured and/or listed throughout the M&M Control Service, Inc. Website.

(Powers^TM, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for Powers^TM)

(All names unintentionally excluded from this list will be included in the next revision upon our notification.)

*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.