|
Pressure
Regulating Valves
A-31,
A-31S
Small Pressure Regulating Valves for Water, Air, Light Oil
Applications:
Drinking fountains, bubblers, water coolers, humidifiers,
beverage dispensers, spraypaint rigs, air tools, etc. For
water, air, light oil.
Sizes:
1/8", 1/4", 3/8"
Features:
Reduces high pressure to lower outlet pressure within close
limits. Good for inlet pressures up to 300 psi. Maximum temperature
180°F (82°C).
Click
here for PDF (CAVMC-0508-US) |
|
A-31
HC
Pressure REgulating Valve For Mobile Homes
Applications:
Mobile homes and recreational trailers.
Sizes:
3/8" only
Features:
This
modified regulator is specially designed for mobile homes
and recreational trailer installations where space limitations
are important and relatively low capacity is required.
Click
here for PDF (CAVMC-0508-US) |
|
A-360,
A-361, A-362
Small Commercial Pressure Regulating Valves
Applications:
Recommended for regulating the floe of air, oils,
gases and all non-corrosive fluids. Not
for use on steam.
Sizes:
1/4", 3/8", 1/2" (A-362 1/4" and 3/8"
only)
Features:
The A-360 and A-361 incorporate an aspirating action
to give exceptionally good regulation at high flow rates.
Maximum initial pressure, 400 psi. Maximum delivery pressure,
175 psi. Maximum temperature, 180° F (82°C).
Type
A-360 has one inlet and one outlet; furnished with forged
brass body.
Type
A-361 is designed for 3-way or 4-way use. One inlet, three
outlets. Gauge tappings 1/4" NPT; cast bronze body.
Type
A-362 is a special modification of the A-360 for pressures
up to 1,100 psi inlet, to 250 psi outlet. Sizes 1/4"
and 3/8" only.
Click
here for PDF (CAVMC-0508-US) |
|
B
Pressure Regulating Valve
Applications:
Water, air, light oil: spray equipment, dishwashers, air tanks,
food, chemical and industrial process lines. Steam: unit heater,
pressing irons, steam cookers, degreasers, sterilizers, vulcanizers.
Sizes:
1/4", 3/8", 1/2", 3/4", 1", 11/4",
11/2", 2" on NPT or BSPP Threads.
Features:
Automatically maintains, within close limits, the desired
reduced pressure in the service line. Threaded connections.
Iron
body valves are for initial pressures up to 200 psi on water,
air, oil, or other liquids, and for initial pressures up to
150 psi on
steam. Maximum delivery pressure in all cases is 125 psi.
Bronze body valves are for initial pressures up to 400 psi
on water, air,
oil, etc. and for pressures up to 250 psi on steam. Maximum
delivery pressure 150 psi. TeflonŽ Seat available for temperatures
to 350° maximum on steam.
Click
here for PDF (CAVMC-0509-US) . |
|
B-95
Pressure Reducing or Pressure Build Regulating Valve
Applications:
Suitable for almost any service. Water, air, light oil, steam:
suitable for chemical, food, pulp & paper industry, utility
lines, and specialist OEM applications. Cryogenic: suitable
for liquid or gas phase in the pressure build circuit of cryogenic
storage tanks.
Sizes:
1/2", 3/4", 1" in NPT or BSPP Threads.
Features:
Automatically maintains, within close limits, the desired
reduced pressure in the service line. Threaded connections.
Investment cast carbon steel and stainless steel bodies, chambers
and bottom plug, with stainless steel trim and a choice of
metal-to-metal, TeflonŽ or BUNA-N-seating. Initial pressure
up to 720 psig, reduced pressures up to 400 psig and the operating
temperature range is -320°F to +450°F depending on the trim
options.
Click
here for PDF (CAVMC-0509-US). |
|
BBC
Pressure Regulating Valve For Heavy Oil
Applications:
Intended for Heavy Oil Service (Bunker C and other grades),
dirty liquids, high viscosity fluids.
Sizes:
3/8", 1/2", 3/4", 1", 11/4", 11/2"
Features:
Direct acting, single seat, spring loaded diaphragm. Maintains
lower pressure within reasonably close limits.
Iron
or bronze bodies, threaded connections, MonelŽ or BUNA-N diaphragm.
Stainless steel piston and seat, both of which are renewable.
Standard valve equipped with square head adjusting screw.
Maximum initial pressure in iron, 200 psi; maximum reduced
pressure, 125 psi. In bronze, maximum initial pressure, 400
psi; maximum reduced pressure, 200 psi.
Click
here for PDF (CAVMC-0509-US). |
|
BCA
Pressure Regulating Valve For Ammonia
Applications:
Gas or Liquid Ammonia Service.
Sizes:
3/8", 1/2", 3/4", 1", 11/4", 11/2"
Features:
Direct acting, single seated, spring loaded diaphragm. Maintains
lower pressure within reasonably close limits. Cast in gray
iron. Threaded connections, MonelŽ diaphragm, stainless steel
piston, seat, pusher post button, iron bottom plug. Piston
seat and body seat are easily renewable. Rustproof steel bolting.
maximum initial pressure, 200 psi; maximum reduced pressure,
125 psi.
Click
here for PDF (CAVMC-0509-US). |
|
E-55
High Capacity Pressure Regulating Valve
Applications:
All types of water systems; various pneumatic, cryogenic and
hydraulic systems, etc.
Sizes:
1/2", 3/4", 1", 11/4", 11/2", 2"
in NPT and BSPT threads.
Features:
Aspirated design for close pressure control. Handles high
and variable flow rates well beyond the limitations of ordinary
regulators. Bronze body with stainless steel body seat. Brass
built in strainer is easily removed for cleaning. Maximum
initial pressure, 400 psi. Delivery pressure: maximum 300
psi; minimum 25 psi. Maximum temperature 180°F (82°C).
Click
here for PDF (CAVMC-0510-US). |
|
G-4
Pilot Operated Pressure Reducing Valve
Applications:
Steam heating lines, dryers, ovens, sterilizers, oil heaters,
steam jacketed equipment etc. and any other steam, air and
gaseous application.
Sizes:
1/2", 3/4", 1",11/4",11/2", 2"
threaded
21/2", 3", 4", 5", 6" CL125 flange
1/2", 3/4", 1",11/4",11/2", 2",
21/2", 3", 4", 5", 6" CL150 and CL300
flanges
Features:
Self actuated pilot operated pressure reducing valve providing
very high capacity with less <1 psi fall-off. It is very
compact in design, offers positive shut off and is available
in iron, bronze, cast and stainless steel for pressures up
to 600 psi inlet, between 1 and 300 psi outlet and temperatures
up to 800°F. Stainless steel seats are used for steam and
where a tighter shut off is required for air and gases BUNA-N
and TFEŽ seats are used. Also may be modified for oxygen gas
service.
Click
here for PDF (CAVMC-0512-US). |
|
G-60
High Capacity Pressure Regulating Valve
Applications:
Dryers, steam atomizing oil burners, plastic molding, cookers,
degreasers, sterilizers. Also, liquid or gas cryogenic service.
Sizes:
1/4", 3/8", 1/2", 3/4", 1", 11/4",
11/2"
Features:
Self-contained, self actuated, threaded connections. Produces
exceptional control with high capacity. Its design offers
a wide range of adjustment and exceptional sensitivity of
control.
Click
here for (CAVMC-0511-US). |
|
LS
Series High Pressure Regulating Valve
Applications:
Designed for use on air, water, light oil, oxygen, carbon
dioxide and other gases and fluids.
Sizes:
3/8", 1/2", 3/4"
Features:
Single seated, spring loaded, direct acting diaphragm type
regulator. Maintains reduced pressure within reasonably close
limits regardless of inlet fluctuations. Maximum initial pressure
up to 2,400 psi. Delivery pressure: maximum, 500 psi; minimum,
40 psi. Bronze body, spring chamber and bottom plug; stainless
steel piston/piston assemblies, cylinders, seat ring and strainer
screens; BUNA-N diaphragm and O-rings. Self-renewable seat
ring may be flipped over and reinstalled rather than replaced.
Click
here for PDF (CAVMC-0513-US). |
|
MORE
VALVES
|
